Luminaire LSP3901A ABS/PS 2x18W IP65 IEK
Main specifications
| Type of luminaire | Luminaire with cover |
| Max. system power, W | 18 |
| Rated luminous flux acc. IEC 62722-2-1, lm | - |
| Degree of protection (IP) | IP65 |
| Material housing | ABS |
Description
The luminaires are designed for general lighting in public, production and auxiliary premises with increased content of dust and moisture (laundries, green houses, factory shops, garages, basements, etc.), and also for outdoor lighting on construction and production sites. Meet the requirements of EN 55015, 60598-1, 60598-2-1, 61547.
Life time:
10 years
Warranty:
1 years
Advantages
- Корпус светильника выполнен из не поддерживающего горения АБС-пластика.
- Материал рассеивателя: моделей 3901, 3901А, 3902, 3902А - полистирол; моделей 3907, 3907А, 3908, 3908А - поликарбонат.
- Оснащены ПРА со стартером или ЭПРА в зависимости от модификации.
- Каждая модель, оснащенная ПРА со стартером, комплектуется компенсирующим конденсатором.
- Способы установки: накладной на стену, потолок, подвесной.
Design Features
Highly durable polycarbonate diffuser. The material withstands high-temperature operation and does not turn yellow over time.
Each model equipped with a starter gear is supplied with a compensating capacitor (luminaire power factor cos j min. 0.85).
Polycarbonate combines: good optical properties, high strength, low weight, wide temperature range of application (from -40 °C to +120 °C), flexibility, fire resistance, durability.
Installation methods: surface mounting, wall mounting and suspension.
Specifications
| Type of luminaire | Luminaire with cover |
| Max. system power, W | 18 |
| Rated luminous flux acc. IEC 62722-2-1, lm | - |
| Degree of protection (IP) | IP65 |
| Material housing | ABS |
| Power factor | ≥ 0,7 |
| Ambient class | UHL2 |
| Special application | Other |
| Mounting height/depth (embedded), mm | - |
| Colour temperature, K | - |
| Protection class | I |
| Suitable for emergency lighting | No |
| With movement sensor | No |
| Suitable for lamp power, W | - |
| Power factor | ≥ 0,7 |
| Width, mm | 130.0 |
| Height/depth, mm | 95.0 |
| Length, mm | 665 |
| Outer diameter, mm | 130 |
| Conductor cross section, mm² | 0,75...1,5 |
| Lamp power, W | 18 |
| Nominal frequency, Hz | 50 |
| Mechanical Execution Group | M3 |
| Support Surface Material | F- from normally flammable material |
| Suitable for wall mounting | Yes |
| Suitable for suspended mounting | Yes |
| Suitable for ceiling mounting | Yes |
| Suitable for built-in mounting | No |
| Suitable for surface mounting | Yes |
| Suitable for light line configuration | Yes |
| Fit for monitor workplace | No |
| Lamptype | Fluorescent lamp D=26 mm |
| Suitable for number of lamps | 2 |
| Lamp holder | G13 |
| Material cover | Polystyrene |
| Voltage type | AC |
| Nominal voltage, B | 230 |
| Type of gear | Conventional ballast |
| Control unit included | No |
| No dim function | No |
Documents
Set contains
Металлическая пластина;
Резиновый сальник;
Сальник PG;
Пластиковый хомут;
Компенсирующий конденсатор;
Метизы.
Logistics parameters
| Individual | Transport | |
|---|---|---|
| Quantity | 1 | 8 |
| Units | pc; 1 | pc; 1 |
| Type of packaging | BOX/BOX | CORPORATED |
| Packaging material | THREE-LAYER CORRUGATED | FIVE-LAYER CORPORATED |
| Barcode | 4606056126068 | 4606056126075 |
| Gross weight, kg | 1.65 | 13.2 |
| Netto weight, kg | 1.5675 | 12.54 |
| Volume, m^3 | 0.006658 | 0.053265 |
| Length, cm | 66.5 | 67 |
| Height, cm | 6.5 | 30 |
| Width, cm | 13 | 26.5 |
| Method of applying information | Mold | Mold |
