Luminaire DSP 1306 36W 4500k IP65 1200mm gray plastic IEK
Main specifications
| Type of luminaire | Luminaire with cover |
| Max. system power, W | 36 |
| Rated luminous flux acc. IEC 62722-2-1, lm | 3600 |
| Degree of protection (IP) | IP65 |
| Material housing | Plastic |
Description
The luminaires are designed for lighting in public, technical and industrial premises with harsh operating conditions, such as parkings, factory shops, underground crossings, subway stations, tunnels, workshops, warehouses, etc. High degree of dust and moisture protection (IP65) allows for use of DSP luminaires for indoor lighting in areas with high content of dust and moisture: basements, laundries, garages, parkings, workshops, auxiliary rooms, etc., and also for outdoor lighting on construction and production sites. Meet the requirements of EN 55015, 60598-1, 60598-2-1, 61547.
Life time:
30000 часов
Warranty:
3 года
Advantages
- Отсутствие пульсаций светового потока (менее 5%), что позволяет снизить зрительную утомляемость и обеспечить комфортное освещение.
- Надежный драйвер, обеспечивающий коэффициент мощности - 0,8 и 0,9 (для ДСП 1403).
- Удобство и широта возможностей монтажа значительно расширяет сферу применения светильников.
- Базовая комплектации светильников серии ДСП снабжена 2 видами скоб: для потолочного крепления и крепления с помощью тросов (тросы ТМ ИЭК в комплект не входят).
- Защита от воздействия агрессивной среды, позволяющая использовать светильники как в помещениях, так и снаружи зданий (IP65).
- Модель ДСП 1302Д оснащена инфракрасным датчиком движения, обеспечивая максимальное энергосбережение. Радиус действия датчика - 5 м.
Design Features
Infrared motion detector (for DSP 1304D and 1305D luminaires).
Dissector is made of matt high impact polycarbonate.
Gland for cable inlet.
Uniform distribution of light flux.
Specifications
| Type of luminaire | Luminaire with cover |
| Max. system power, W | 36 |
| Rated luminous flux acc. IEC 62722-2-1, lm | 3600 |
| Degree of protection (IP) | IP65 |
| Material housing | Plastic |
| Operating voltage range, B | 198...255 |
| Colour housing | Grey |
| Extreme-temperature, °C | -25...45 |
| Power factor | ≥ 0,9 |
| Suitable for wall mounting | Yes |
| Suitable for suspended mounting | Yes |
| Suitable for ceiling mounting | Yes |
| Suitable for built-in mounting | No |
| Suitable for surface mounting | Yes |
| Suitable for light line configuration | No |
| Fit for monitor workplace | No |
| Lamptype | LED not exchangeable |
| With lamp | Yes |
| Suitable for number of lamps | - |
| Lamp holder | Other |
| Material cover | Plastic, opal/matt |
| Voltage type | AC |
| Nominal voltage, B | 230 |
| Type of gear | LED driver |
| Control unit included | No |
| No dim function | No |
| Light sharing | Medium beam |
| Light outlet | Direct |
| Protection class | II |
| Suitable for emergency lighting | No |
| With movement sensor | No |
| Suitable for lamp power, W | - |
| Colour rendering index | 80-89 (class 1B) |
| Power factor | ≥ 0,9 |
| Width, mm | 66.0 |
| Height/depth, mm | 66.0 |
| Length, mm | 1200 |
| Outer diameter, mm | 76 |
| Conductor cross section, mm² | 0,5...1,0 |
| Lamp power, W | 36 |
| Colour cover | None |
| Light colour category | Neutral |
| Nominal frequency, Hz | 50 |
| Operating temperature range, °C | -25...45 |
| Support Surface Material | F- from normally flammable material |
| Ambient class | UHL3.1 |
| Number of LEDs | 180 |
| Luminous flux pulsation factor, percent | ≤ 5 |
| Light source | SMD 2835 LEDs |
| Special application | Other |
| Mounting height/depth (embedded), mm | - |
| Colour temperature, K | 4000 |
Logistics parameters
| Individual | Transport | |
|---|---|---|
| Quantity | 1 | 12 |
| Units | pc; 1 | pc; 1 |
| Type of packaging | BOX/BOX | CORPORATED |
| Packaging material | CARDBOARD | FIVE-LAYER CORPORATED |
| Barcode | 4606056500059 | 4606056500066 |
| Gross weight, kg | 1.008 | 12.096 |
| Netto weight, kg | 0.958 | 11.496 |
| Volume, m^3 | 0.009144 | 0.109728 |
| Length, cm | 126.5 | 127 |
| Height, cm | 7.5 | 24 |
| Width, cm | 8.5 | 35 |
| Method of applying information | Sticker | Mold |
