ELASTA Corrugated pipe holder for CFM20 mounting gun black IEK
New
Product ID:
Main specifications
Suitable for pipe diameter, mm | 20 |
Type of fastening | Screw hole |
Material | Plastic |
Colour | Black |
RAL-number | 9004 |
Description
The CFM nail holder is used to fasten plastic pipes to the surface of walls, ceilings, floors and partitions. Clips for mounting gun are a new level of convenience, simplicity and reliability of installation of cable lines. Thanks to the use of a mounting gun, the mounting speed is increased several times.
Advantages
- Quick installation.
- Reliable fastening of pipes.
- Label for centering the clips according to the markup.
- Reduced recoil due to gas venting channels.
- Fixing the clip on the barrel of the mounting gun due to special notches on the base.
- Reduced hole diameter to prevent fastener jumping.
- Reinforced base for increased mechanical loads.
- Connection of clips with the help of special dovetail clamps.
Specifications
Suitable for pipe diameter, mm | 20 |
Type of fastening | Screw hole |
Material | Plastic |
Colour | Black |
RAL-number | 9004 |
Closed | No |
Ambient temperature, °C | -10...60 |
Tackable | Yes |
Mounting temperature, °C | -5...40 |
Max. number of tubes | 1 |
Operating temperature range, °C | -10...60 |
Relative humidity | 75% при 15°С |
Logistics parameters
Group | Transport | |
---|---|---|
Quantity | 100 | 1500 |
Units | pc; 1 | pc; 1 |
Type of packaging | RECTANGULAR PACKAGE | BOX/BOX |
Packaging material | POLYETHYLENE (PE) | THREE-LAYER CORRUGATED |
Barcode | 4610084666762 | 4610084666779 |
Gross weight, kg | 0.31 | 4.65 |
Netto weight, kg | 0.3 | 4.5 |
Volume, m^3 | 0.0021 | 0.0315 |
Length, cm | 17 | 40.5 |
Height, cm | 25 | 25.5 |
Width, cm | 5 | 30.5 |
Method of applying information | Mold | Mold |