ELASTA Holder for corrugated pipes for mounting gun CFM16 black IEK
New
Product ID:
Main specifications
| Suitable for pipe diameter, mm | 16 |
| Type of fastening | Screw hole |
| Material | Plastic |
| Colour | Black |
| RAL-number | 9004 |
Description
The CFM nail holder is used to fasten plastic pipes to the surface of walls, ceilings, floors and partitions. Clips for mounting gun are a new level of convenience, simplicity and reliability of installation of cable lines. Thanks to the use of a mounting gun, the mounting speed is increased several times.
Advantages
- Quick installation.
- Reliable fastening of pipes.
- Label for centering the clips according to the markup.
- Reduced recoil due to gas venting channels.
- Fixing the clip on the barrel of the mounting gun due to special notches on the base.
- Reduced hole diameter to prevent fastener jumping.
- Reinforced base for increased mechanical loads.
- Connection of clips with the help of special dovetail clamps.
Specifications
| Suitable for pipe diameter, mm | 16 |
| Type of fastening | Screw hole |
| Material | Plastic |
| Colour | Black |
| RAL-number | 9004 |
| Closed | No |
| Ambient temperature, °C | -10...60 |
| Tackable | Yes |
| Mounting temperature, °C | -5...40 |
| Max. number of tubes | 1 |
| Operating temperature range, °C | -10...60 |
| Relative humidity | 75% при 15°С |
Logistics parameters
| Group | Transport | |
|---|---|---|
| Quantity | 100 | 1500 |
| Units | pc; 1 | pc; 1 |
| Type of packaging | RECTANGULAR PACKAGE | BOX/BOX |
| Packaging material | POLYETHYLENE (PE) | THREE-LAYER CORRUGATED |
| Barcode | 4610084666748 | 4610084666755 |
| Gross weight, kg | 0.31 | 4.65 |
| Netto weight, kg | 0.3 | 4.5 |
| Volume, m^3 | 0.0021 | 0.0315 |
| Length, cm | 17 | 40.5 |
| Height, cm | 25 | 25.5 |
| Width, cm | 5 | 30.5 |
| Method of applying information | Mold | Mold |
