Enter at least 2 characters

Perforated tray 80x500x2000 IEK

Perforated tray 80x500x2000 IEK
New
Product ID:

Main specifications

Width, mm500
Tray TypePerforated
Height, mm80
Length, mm2000
Material qualityOther
View all specifications

Description

Perforated rolling trays are part of the metal cable support systems of the IEK group of companies. Designed for laying and protection of power and low-voltage cables. When used in conjunction with a cover, it provides maximum cable protection against external influences, dust and moisture. Depending on the version, the trays can be used both inside public, industrial buildings, structures and retail facilities, as well as outdoors under a canopy, in the open air, as well as in rooms with high humidity. Rolled perforated trays IEK are made of cold-rolled steel coils, galvanized by a conveyor method or by dipping finished products in a zinc melt. The IEK rolling tray system consists of straight elements and accessories designed to change the direction of the route, as well as covers and connecting elements of various sizes. For safety requirements, the product complies with IEC 61537.

  • Life time:

    20 years

  • Warranty:

    3 years

Advantages

  • Open method of cable routing with use of metal trays enables easy maintenance of electric and low-voltage systems and its development in future.
  • The lock design is featured by tubular (round section) shape without sharp edges.
  • The tubular shape of the lock greatly improves strength characteristics of the trays.
  • The range of trays and accessories sizes allows for engineering of cable route of any complexity level.
Perforated tray 80x500x2000 IEK

Design Features

Together with the tray a partition can be used, which serves to separate the tray into two or more sections in case of mounting the wires of different types (and power information) in one tray in order to avoid interferences.

Together with the tray a partition can be used, which serves to separate the tray into two or more sections in case of mounting the wires of different types (and power information) in one tray in order to avoid interferences.

All trays and accessories are connected together by a unified set of connection KS M6x10. Thus, to assemble the track of any degree of complexity is necessary three types of hardware in all. Due to the square headrest locking the bolt of set of connection KS M6x10, connection of trays and accessories requires only one M10 key.

All trays and accessories are connected together by a unified set of connection KS M6x10. Thus, to assemble the track of any degree of complexity is necessary three types of hardware in all. Due to the square headrest locking the bolt of set of connection KS M6x10, connection of trays and accessories requires only one M10 key.

The tray has collapsible lock of circular shape which also increases the mechanical strength of the tray compared with straight trays without locks.

The tray has collapsible lock of circular shape which also increases the mechanical strength of the tray compared with straight trays without locks.

Full range of accessories (vertical and horizontal bends, T-shaped and X - shaped taps) allows you to freely change the direction and level, making branches and organize cable runs of any complexity.

Full range of accessories (vertical and horizontal bends, T-shaped and X - shaped taps) allows you to freely change the direction and level, making branches and organize cable runs of any complexity.

Specifications

Width, mm500
Tray TypePerforated
Height, mm80
Length, mm2000
Material qualityOther
Suitable for circuit integrityYes
MaterialSteel
Stainless steel, pickledNo
ColourLight grey
RAL-number7047
Weight, kg per m n6.36
Material thickness, mm1,2
Surface protectionSendzimir galvanized
Side wall perforationYes
Mounting perforation in bottomYes
NATO-mounting holesYes
ModelIntegrated connector
Wide span modelNo

Logistics parameters

GroupTransport
Quantity24
Unitsmm
Type of packagingNO PACKAGINGTUTU
Packaging materialNOT SPECIFIEDPOLYPROPYLENE
Barcode46100843878414606056337167
Gross weight, kg12.10624.212
Netto weight, kg12.10524.21
Volume, m^30.04080.0816
Length, cm200200
Height, cm851
Width, cm508
Method of applying informationMoldMold

Compatible Products

Analogs

Perforated rolling trays are part of the metal cable support systems of the IEK group of companies. Designed for laying and protection of power and low-voltage cables. When used in conjunction with a cover, it provides maximum cable protection against external influences, dust and moisture. Depending on the version, the trays can be used both inside public, industrial buildings, structures and retail facilities, as well as outdoors under a canopy, in the open air, as well as in rooms with high humidity. Rolled perforated trays IEK are made of rolled cold-rolled steel, galvanized by a conveyor method in accordance with GOST 14918-80 or by immersing finished products in a zinc melt GOST 9.307. The IEK rolling tray system consists of straight elements and accessories designed to change the direction of the route, as well as covers and connecting elements of various sizes. The perforated tray is produced according to TU 27.33.13-002-83135016-2017. In terms of safety requirements, the product complies with the technical regulations TR TS 004/2011 and GOST R 52868-2021.

Perforated tray 80x500x3000 IEK

Non-perforated rolling trays are part of the metal cable support systems of the IEK group of companies. Designed for laying and protection of power and low-voltage cables. When used in conjunction with a cover, it provides maximum cable protection against external influences, dust and moisture. Depending on the version, the trays can be used both inside public, industrial buildings, structures and retail facilities, as well as outdoors under a canopy, in the open air, as well as in rooms with high humidity. Rolled non-perforated trays IEK are made of rolled cold-rolled steel, galvanized by a conveyor method in accordance with GOST 14918-80 or by immersing finished products in a zinc melt GOST 9.307. The IEK rolling tray system consists of straight elements and accessories designed to change the direction of the route, as well as covers and connecting elements of various sizes. The non-perforated tray is produced according to TU 27.33.13-002-83135016-2017. In terms of safety requirements, the product complies with the technical regulations TR TS 004/2011 and GOST R 52868-2021.

Non-perforated tray 80x500x3000 IEK

Perforated rolling trays are part of the metal cable support systems of the IEK group of companies. Designed for laying and protection of power and low-voltage cables. When used in conjunction with a cover, it provides maximum cable protection against external influences, dust and moisture. Depending on the version, the trays can be used both inside public, industrial buildings, structures and retail facilities, as well as outdoors under a canopy, in the open air, as well as in rooms with high humidity. Rolled perforated trays IEK are made of cold-rolled steel coils, galvanized by a conveyor method or by dipping finished products in a zinc melt. The IEK rolling tray system consists of straight elements and accessories designed to change the direction of the route, as well as covers and connecting elements of various sizes. For safety requirements, the product complies with IEC 61537.

Perforated tray 80x500x2000 HDZ IEK

Non-perforated rolling trays are part of the metal cable support systems of the IEK group of companies. Designed for laying and protection of power and low-voltage cables. When used in conjunction with a cover, it provides maximum cable protection against external influences, dust and moisture. Depending on the version, the trays can be used both inside public, industrial buildings, structures and retail facilities, as well as outdoors under a canopy, in the open air, as well as in rooms with high humidity. Rolled non-perforated trays IEK are made of cold-rolled steel coils, galvanized by a conveyor method or by dipping finished products in a zinc melt. The IEK rolling tray system consists of straight elements and accessories designed to change the direction of the route, as well as covers and connecting elements of various sizes. For safety requirements, the product complies with IEC 61537.

Non-perforated tray 80x500x2000 IEK