Enter at least 2 characters

Non-perforated tray 100x200x3000-1,0 IEK

Non-perforated tray 100x200x3000-1,0 IEK
New
Product ID:

Main specifications

Width, mm200
Tray TypeUnperforated
Height, mm100
Length, mm3000
Material qualityOther
View all specifications

Description

Non-perforated rolling trays are part of the metal cable support systems of the IEK group of companies. Designed for laying and protection of power and low-voltage cables. When used in conjunction with a cover, it provides maximum cable protection against external influences, dust and moisture. Depending on the version, the trays can be used both inside public, industrial buildings, structures and retail facilities, as well as outdoors under a canopy, in the open air, as well as in rooms with high humidity. Rolled non-perforated trays IEK are made of cold-rolled steel coils, galvanized by a conveyor method or by dipping finished products in a zinc melt. The IEK rolling tray system consists of straight elements and accessories designed to change the direction of the route, as well as covers and connecting elements of various sizes. The non-perforated tray is produced according to TU 27.33.13-002-83135016-2017. For safety requirements, the product complies with IEC 61537.

  • Life time:

    20 years

  • Warranty:

    3 years

Advantages

  • Open method of cable routing with use of metal trays enables easy maintenance of electric and low-voltage systems and its development in future.
  • The lock design is featured by tubular (round section) shape without sharp edges.
  • The tubular shape of the lock greatly improves strength characteristics of the trays.
  • The range of trays and accessories sizes allows for engineering of cable route of any complexity level.
Non-perforated tray 100x200x3000-1,0 IEK

Design Features

Together with the tray a partition can be used, which serves to separate the tray into two or more sections in case of mounting the wires of different types (and power information) in one tray in order to avoid interferences.

Together with the tray a partition can be used, which serves to separate the tray into two or more sections in case of mounting the wires of different types (and power information) in one tray in order to avoid interferences.

All trays and accessories are connected together by a unified set of connection KS M6x10. Thus, to assemble the track of any degree of complexity is necessary three types of hardware in all. Due to the square headrest locking the bolt of set of connection KS M6x10, connection of trays and accessories requires only one M10 key.

All trays and accessories are connected together by a unified set of connection KS M6x10. Thus, to assemble the track of any degree of complexity is necessary three types of hardware in all. Due to the square headrest locking the bolt of set of connection KS M6x10, connection of trays and accessories requires only one M10 key.

The tray has collapsible lock of circular shape which also increases the mechanical strength of the tray compared with straight trays without locks.

The tray has collapsible lock of circular shape which also increases the mechanical strength of the tray compared with straight trays without locks.

For fixing the tray onto the walls and ceiling a wide range of universal suspensions is offered, such as prefabricated elements with a screw and a quick fixation, and the unitary design which consists of a single element.

For fixing the tray onto the walls and ceiling a wide range of universal suspensions is offered, such as prefabricated elements with a screw and a quick fixation, and the unitary design which consists of a single element.

Specifications

Width, mm200
Tray TypeUnperforated
Height, mm100
Length, mm3000
Material qualityOther
Material thickness, mm1
Surface protectionSendzimir galvanized
Side wall perforationNo
Mounting perforation in bottomNo
NATO-mounting holesYes
ModelIntegrated connector
Wide span modelYes
Suitable for circuit integrityYes
MaterialSteel
Stainless steel, pickledNo
ColourLight grey
RAL-number7047
Weight, kg per m n3.44

Documents

Logistics parameters

GroupTransport
Quantity36
Unitsmm
Type of packagingNO PACKAGINGTUTU
Packaging materialNOT SPECIFIEDPOLYPROPYLENE
Barcode46100843861584606056551891
Gross weight, kg10.26320.526
Netto weight, kg10.26320.526
Volume, m^30.060.063
Length, cm300300
Height, cm1021
Width, cm2010
Method of applying informationMoldMold

Compatible Products

Analogs

HDZ non-perforated rolling trays (manufactured by zinc dipping) are part of the metal cable support systems of the IEK Group. Designed for laying and protection of power and low-voltage cables. When used in conjunction with a cover, it provides maximum cable protection against external influences, dust and moisture. Depending on the version, the trays can be used both inside public, industrial buildings, structures and retail facilities, as well as outdoors under a canopy, in the open air, as well as in rooms with high humidity. The IEK rolling tray system consists of straight elements and accessories designed to change the direction of the route, as well as covers and connecting elements of various sizes. According to safety requirements, the product complies with the IEC 61537 technical regulation.

Non-perforated tray 100x200x3000-1,0 HDZ IEK

HDZ non-perforated rolling trays (manufactured by zinc dipping) are part of the metal cable support systems of the IEK Group. Designed for laying and protection of power and low-voltage cables. When used in conjunction with a cover, it provides maximum cable protection against external influences, dust and moisture. Depending on the version, the trays can be used both inside public, industrial buildings, structures and retail facilities, as well as outdoors under a canopy, in the open air, as well as in rooms with high humidity. The IEK rolling tray system consists of straight elements and accessories designed to change the direction of the route, as well as covers and connecting elements of various sizes. According to safety requirements, the product complies with the IEC 61537 technical regulation.

Non-perforated tray 100x200x3000-1,2 HDZ IEK

Non-perforated rolling trays are part of the metal cable support systems of the IEK group of companies. Designed for laying and protection of power and low-voltage cables. When used in conjunction with a cover, it provides maximum cable protection against external influences, dust and moisture. Depending on the version, the trays can be used both inside public, industrial buildings, structures and retail facilities, as well as outdoors under a canopy, in the open air, as well as in rooms with high humidity. Rolled non-perforated trays IEK are made of cold-rolled steel coils, galvanized by a conveyor method or by dipping finished products in a zinc melt. The IEK rolling tray system consists of straight elements and accessories designed to change the direction of the route, as well as covers and connecting elements of various sizes. The non-perforated tray is produced according to TU 27.33.13-002-83135016-2017. For safety requirements, the product complies with IEC 61537.

Non-perforated tray 100x200x3000-1,2 IEK