Voltage Stabilizer SNI3-7,5 kVA 3-phase IEK
Main specifications
| Primary voltage, B | 160 |
| Rated power, VA | 7500 |
| Max. input current AC 50 Hz, A | 3х10 |
| Model | Floor unit |
| Stabilization type | Electromechanical |
Description
The voltage stabilizers of IEK brand are intended for maintaining stable single/three-phase supply voltage of residential and industrial loads of 220 V/3 x 220 V, 50 Hz at power fluctuations within wide range of value and period of time.
They are applied for stabilizing voltage when working with highly-sensitive equipment in industrial sites, medical institutions, telecommunication companies, low-rise building as well as housing and public utility sector. SNI voltage regulators provide for extending the service life of alarm systems, computer equipment etc.
Correspond to standards EN 55014-1, EN 55014-2, EN 60335-1, EN 61000-3-2.
Electromechanical voltage stabilizers of SNI series are represented in the products stock by widest range of power (0.5 to 150 kVA), where models list includes the stabilizers for different types of mains: single-phase (SNI1 series) and three-phase (SNI3 series). SNI electromechanical voltage stabilizers have high energy efficiency performances, increased stabilization precision and good resistance against overloads. The advantages mentioned above are highly appreciated primarily by commercial customers.
Life time:
10 years
Warranty:
3 years
Advantages
- High precision in maintaining the output voltage within the input voltage operating range (220V+/-3%).
- Wide input voltage range:
- - SNI1: 160-250V;
- - SNI3: 160-250V – phase; 280-430V – linear.
- High efficiency: more than 90%.
- Six protection degrees: from overload short circuit, overheating, dangerous overvoltage, dangerous undervoltage, surge overvoltages.
- Stabilizer does not disturb the sinusoidal waveform of output voltage.
- Modern circuit modeling.
- High quality protection and commutation IEK units: VA47-29, VA47-100 series breakers and KMI AC contactors.
- Convenient mounting, maintenance and transportation at the expense of built-in ergonomic handles (for small sized regulators) and wheels (for larger units).
Design Features
Indication of the input and output voltages levels of each phase.
SNI3 voltage stabilizers provide a function of protection from phase loss, which disables stabilizer when such emergency occurs. This protection is especially important when motors are powered (refrigerators, air conditioners, etc.), which fail when the phase is lost.
Two-pole automatic circuit breakers of IEK trademark, installed in SNI1 single-phase voltage regulators, protect the phase and neutral conductors that improves electrical safety and reliability of the stabilizer.
Ease of installation and maintenance of the stabilizer.
Specifications
| Primary voltage, B | 160 |
| Rated power, VA | 7500 |
| Max. input current AC 50 Hz, A | 3х10 |
| Model | Floor unit |
| Stabilization type | Electromechanical |
| Secondary voltage, B | 220 |
| Number of phases | Four conductor |
| Bypass (bypass mode) | No |
| Degree of protection (IP) | IP20 |
| Suitable for surface mounting | No |
| Weight, kg | 39,6 |
| Height, mm | 768 |
| Width, mm | 320 |
| Operating input voltage range, B | 160...250/280...430 |
| Actuation voltage of protection against increased output voltage Umax, B | 246±4 |
| Actuation voltage of protection against decreased output voltage Umin, B | 184±4 |
| Time of reaction, ms | <1000 |
| Temperature protection | Yes |
| Ambient class | UHL4 |
| Depth, mm | 355 |
| Suitable for wall mounting | No |
| Working entrance. phase voltage, B | - |
| Working entrance. line voltage, B | 280...430 |
| Maximum allowable. entrance. phase voltage, B | - |
| Maximum allowable. entrance. line voltage, B | 235...475 |
| Rated exit. phase voltage, B | - |
| Rated exit. line voltage, B | 380 |
| Stabilization Accuracy + or -, percent | 3 |
Documents
Set contains
Стабилизатор - 1 шт;
Руководство по эксплуатации. Паспорт - 1 экз;
Запасные щетки автотрансформатора - 3 шт;
Упаковочная коробка - 1 шт.
Logistics parameters
| Individual | Transport | |
|---|---|---|
| Quantity | 1 | 1 |
| Units | pc; 1 | pc; 1 |
| Type of packaging | BOX | BOX |
| Packaging material | WOOD | WOOD |
| Barcode | 4606056164350 | 4606056164350 |
| Gross weight, kg | 52.25 | 52.25 |
| Netto weight, kg | 50.6825 | 50.683 |
| Volume, m^3 | 0.176814 | 0.176814 |
| Length, cm | 44 | 44 |
| Height, cm | 85.5 | 85.5 |
| Width, cm | 47 | 47 |
| Method of applying information | Mold | Mold |