ARMAT Circuit breaker M10N 1P K 4A IEK
New
Product ID:
Main specifications
Primary current, A | 4 |
Frequency, Hz | 50 |
Nominal rated current, A | 4.0 |
Number of poles | 1 |
Rated surge voltage invariability, kV | 6 |
Description
M10N circuit breakers are designed to protect distribution and group circuits with different loads. Modular circuit breakers with characteristics Z, K, L have been successfully tested according to IEC 60947-2. They have all the advantages of modular equipment of the ARMAT series: increased body strength, reinforced arc chute, independent trip mechanism, etc. This type of circuit breaker is recommended for use in input distribution devices for industrial and energy infrastructure facilities.
Life time:
15 years
Warranty:
10 years
Advantages
- High switching life of 10,000 electrical cycles.
- Ability to connect FORK busbars on either side of the circuit breaker.
- Latch on DIN rail with 2 fixed positions.
- Maximum terminal tightening torque up to 5 Nm.
- Marking pad with transparent cover.
- Full ROHS compliance.
- High speed operation - current limiting class 3.
- 10kA rated breaking capacity.
- Limit switching capacity from 10 to 50 kA (depending on the rating).
Specifications
Primary current, A | 4 |
Frequency, Hz | 50 |
Nominal rated current, A | 4.0 |
Number of poles | 1 |
Rated surge voltage invariability, kV | 6 |
Release characteristic | K |
Rated switching capacity, kA | 7.5 |
Voltage type | AC |
Nominal rated voltage, B | 400 |
Switch off technique | Thermal, electromagnetic |
Power loss, W | 3.0 |
Rated short-circuit breaking capacity EN 60898, kA | 7,5 |
Width in number of modular spacings | 1 |
Max. cross section incoming cable, mm² | 25 |
Frequency, Hz | 50 |
Degree of protection (IP) | IP20 |
Mounting method | DIN-rail (DRA) |
Range of use | Household |
Mechanical wear resistance, cycles | 20000 |
Electric wear resistance, cycles | 10000 |
Possibility of busbars connection | PIN (pin), FORK (plug) |
Weight of one pole, kg | 0,118 |
Number of poles (total) | 1 |
Concurrently switching N-neutral | No |
Additional equipment possible | Yes |
Type of electric connection | Screw connection |
Voltage type for actuating | AC |
Suitable for switch disconnector | Yes |
Suitable for motor safety switch | Yes |
Thermal release | Yes |
Electromagnetic release | Yes |
Electronic release | No |
Residual release | No |
Explosion protection | Without explosion protection |
Mounting rail type | TN-35 |
Operation mode | Continuous-S1 |
Maintainability | None |
Rated insulation voltage Ui, B | 500 |
Number of protected poles | 1 |
Connectable conductor cross section solid-core, mm² | 1...25 |
Connectable conductor cross section multi-wired, mm² | 1...25 |
Ambient temperature during operating, °C | -5...40 |
Electric shock protection class | 0 |
Rated short-circuit breaking capacity Icn EN 60898 at 400 V, kA | 7.5 |
Rated short-circuit breaking capacity Icn EN 60898 at 230 V, kA | 7.5 |
Documents
Passports
Logistics parameters
Individual | Group | Transport | |
---|---|---|---|
Quantity | 1 | 12 | 120 |
Units | pc; 1 | pc; 1 | pc; 1 |
Type of packaging | BOX/BOX | BOX/BOX | CORPORATED |
Packaging material | CORPORATED DOUBLE LAYER | CORPORATED DOUBLE LAYER | FIVE-LAYER CORPORATED |
Barcode | 4610084515657 | 4610084515664 | 4610084515671 |
Gross weight, kg | 0.125 | 1.5 | 15 |
Netto weight, kg | 0.096 | 1.152 | 11.52 |
Volume, m^3 | 0.000183 | 0.002196 | 0.02196 |
Length, cm | 8.3 | 22.5 | 47 |
Height, cm | 7.6 | 8.1 | 19.5 |
Width, cm | 1.8 | 8.8 | 24 |
Method of applying information | Sticker | Sticker | Mold |