Enter at least 2 characters

ARMAT Miniature circuit breaker M10N 1P D 20A IEK

Description

ARMAT M10N series circuit breakers are designed to protect circuits against overload and short-circuit. The range includes devices with tripping characteristics B, C, D and rated currents from 0.5 to 63A. The rated breaking capacity of ARMAT M10N series circuit breakers is 10 kA. The ultimate breaking capacity varies depending on the rating from 10 to 50 kA.

  • Life time:

    15 years

  • Warranty:

    10 years

Advantages

  • High switching life of 10,000 electrical cycles.
  • Possibility to connect tires of FORK type on either side of the circuit breaker.
  • DIN rail latch with 2 fixed positions.
  • The maximum tightening torque of the terminals is up to 5 Nm.
  • Marking area with transparent cover.
  • Full compliance with the ROHS directive.
  • High response speed - current limiting class 3.
  • Rated breaking capacity 10 kA.
  • Limit switching capacity from 10 to 50 kA (depending on the rating).
ARMAT Miniature circuit breaker M10N 1P D 20A IEK

Specifications

Primary current, A20
Frequency, Hz50
Nominal rated current, A20.0
Number of poles1
Rated surge voltage invariability, kV6
Release characteristicD
Voltage typeAC
Nominal rated voltage, B400
Switch off techniqueThermal, electromagnetic
Power loss, W4.5
Weight of one pole, kg0,116
Number of poles (total)1
Rated short-circuit breaking capacity IEC 60947-2, kA15
Concurrently switching N-neutralNo
Additional equipment possibleYes
Type of electric connectionScrew connection
Power poles quantity1
Thermal releaseYes
Electromagnetic releaseYes
Electronic releaseNo
Residual releaseNo
Release actuating time in short-circuit tm zone, s0,1
Explosion protectionWithout explosion protection
Mounting rail type35x7.5
Operation modeContinuous-S1
MaintainabilityNone
Rated insulation voltage Ui, B500
Number of protected poles1
Ambient temperature during operating, °C-40...70
Electric shock protection class0
Rated short-circuit breaking capacity Icn EN 60898 at 400 V, kA10.0
Rated short-circuit breaking capacity Icn EN 60898 at 230 V, kA10.0
Rated short-circuit breaking capacity EN 60898, kA10
Width in number of modular spacings1
Max. cross section incoming cable, mm²25
Current limiting class3
Frequency, Hz50
Degree of protection (IP)IP20
Mounting methodDIN-rail (DRA)
Range of useHousehold
Mechanical wear resistance, cycles20000
Electric wear resistance, cycles10000
Possibility of busbars connectionPIN (pin), FORK (plug)

Documents

Logistics parameters

IndividualGroupTransport
Quantity112120
Unitspc; 1pc; 1pc; 1
Type of packagingNO PACKAGINGCORPORATEDCORPORATED
Packaging materialNOT SPECIFIEDTHREE-LAYER CORRUGATEDFIVE-LAYER CORPORATED
Barcode461008416547046100841654874610084165494
Gross weight, kg0.1231.4814.796
Netto weight, kg0.1161.39213.92
Volume, m^30.00020.00240.024
Length, cm8.322.647.3
Height, cm7.68.720.5
Width, cm1.89.224.8
Method of applying informationLaserStickerMold

Compatible Products