Flush socket MAGNUM SSI-433 63A-6h/200-250V 2P+PE IP67 IEK
Main specifications
| IEC-amperage, A | 63 |
| Voltage acc. EN 60309-2 | 230 V (50+60 Hz) blue |
| Number of poles | 3 |
| Degree of protection (IP) | IP67 |
| Operating voltage range, B | 200...250 |
Description
Original design of MAGNUM power connectors is developed by IEK engineers with strict compliance with requirements of Russian and international standards and considering demands of users – professional electricians and fitters. The solutions utilized in MAGNUM power connectors combine the best global practice and a number of unique special improvements from IEK engineers. The advanced design solutions combined with high-quality materials and high technological level of manufacture guarantee high reliability and safety of design, ergonomic and environment safe products, maximum convenience of mounting and dismounting of MAGNUM power connectors. MAGNUM power connectors can be used for connection of construction electrical equipment and tools, power supply of temporary structures and workers' cabins, machine-tools and other industrial equipment, sport and entertainment facilities, hotels, camp sites, etc. MAGNUM IEK power connectors are manufactured in Russia, at the main IEK industrial facility.
Life time:
15 years
Warranty:
5 years
Advantages
- The connectors plastic parts are made from non-flammable materials, have high strength and dielectric properties, withstand shock loads, wearing and attrition.
- All connectors plastic parts have strengthened design able to withstand high stresses and harsh operating conditions.
- Strengthened conductor connection assembly for all connectors.
- The securely attached covers protect from ingress of dust and moisture into the connector.
- Location of the body screws ensures maximum convenience.
- Penetration of dust is completely prevented. Protection against water jets and short-term immersion under water up to 1m (IP67).
- Item's rough surface ensures convenient grip, which is of particular importance when working in adverse weather conditions (e.g. at high humidity or negative temperatures).
- .
Design Features
All connectors of MAGNUM series are provided with columnar-type clamps with two clamping screws. The screws are placed in the same direction for ease of installation. The clamp firmly secures the conductor, provides high contact pressure, low contact resistance, less heat. Ends of the screws are ground, that eliminates the cutting of live wires.
The 63A and 125A connectors have a "pilot" contact that turns on after the other pins of the plug are connected and opens first when disconnected. The pilot contact is located in the center of the contact circle of a 4 or 5-pin connector.
Fixed connectors have two cable inlets - bottom and top. In both inlets are provided with plastic membranes to provide a degree of protection IP, they can be cut off before installing the gland into the inlet.
To tighten the collet closing mechanism a nut with slots for unscrewing and screwing is used. A bead on hexagon surface is made to abut against it and prevents the dropping off the wrench. For easy screwing a nut with a hand, special retainer tangs are provided on the outer surface.
Specifications
| IEC-amperage, A | 63 |
| Voltage acc. EN 60309-2 | 230 V (50+60 Hz) blue |
| Number of poles | 3 |
| Degree of protection (IP) | IP67 |
| Operating voltage range, B | 200...250 |
| Clock hour position, h | 6 |
| Max. conductor cross section, mm² | 6,0...25,0 |
| Nominal electric insulation strength, B | 500 |
| Nominal frequency, Hz | 50/60 |
| Number of contacts | 2P+PE (single-phase 3-wire) |
| Presence of lock | Electrical locking |
| Fixing device | Cap with bayonet ring |
| Connection system | Screwed terminal |
| Material | Plastic |
| Identification colour | Blue |
| Ambient temperature, °C | -25...40 |
| Angle of plug | Straight |
| Military model | No |
| Flange size vertical, mm | 117.0 |
| Flange size horizontal, mm | 117.0 |
Documents
Set contains
Соединитель - 1 шт.
Уплотнительная прокладка - 1 шт.
Logistics parameters
| Individual | Transport | |
|---|---|---|
| Quantity | 1 | 10 |
| Units | pc; 1 | pc; 1 |
| Type of packaging | SLEEVE | CORPORATED |
| Packaging material | HIGH DENSITY POLYETHYLENE (HDPE) | FIVE-LAYER CORPORATED |
| Barcode | 4606056804010 | 4606056804027 |
| Gross weight, kg | 0.64 | 6.4 |
| Netto weight, kg | 0.64 | 7.49 |
| Volume, m^3 | 0.002499 | 0.02499 |
| Length, cm | 11.7 | 60 |
| Height, cm | 15 | 17 |
| Width, cm | 11.7 | 24.5 |
| Method of applying information | Mold | Mold |