Connector with bolt SB 35-50 1kW IEK

Product ID:

Main specifications

Nominal cross section, mm²	35...50
Bolt dimension metric (M..)	12
Number of screws	4
Surface protection	Bare
Ambient temperature, °C	-60...+80

View all specifications

Description

The bolted terminals and sleeves, like compression terminals and sleeves, are designed for termination of conductors. However they can be fixed without use of expensive equipment. A torque wrench is sufficient. Moreover, their unquestionable advantage is a capability to be used for termination and connection of both copper and aluminum conductors. All products have conductivity according to GOST 17441-84.

Life time:
30 years
Warranty:
6 years

Advantages

Applicable for copper and aluminum cores.
No special tool is required for installation.

Design Features

The design of bolts has several bores, such as shear necks, whereby the head shear occurs flush with or below the surface of the tip.

Each bolted connector is suitable for various sizes and designed for a range of cable cross sections.

Specifications

Nominal cross section, mm²	35...50
Bolt dimension metric (M..)	12
Number of screws	4
Surface protection	Bare
Ambient temperature, °C	-60...+80
Nominal voltage, kV	1
Material	Duralumin alloy
Oil stop/centre bar	No
With shear-off head	Yes
Moment of screw head failure during installation, Nm	24,5
Length, mm	60.0
Width, mm	20.0
Height, mm	20.0
Weight, kg	0,037
Insulation	No

Logistics parameters

	Group	Transport
Quantity	10	600
Units	pc; 1	pc; 1
Type of packaging	RECTANGULAR PACKAGE	CORPORATED
Packaging material	HIGH DENSITY POLYETHYLENE (HDPE)	FIVE-LAYER CORPORATED
Barcode	4606056364019	4606056364026
Gross weight, kg	0.367	22
Netto weight, kg	0.3556667	21.34
Volume, m^3	0.0005	0.018971
Length, cm	10	36.5
Height, cm	5	16.5
Width, cm	10	31.5
Method of applying information	Mold	Mold