Connector with bolt SB 16-25 1kW IEK

Product ID:

Main specifications

Nominal cross section, mm²	16...25
Bolt dimension metric (M..)	10
Number of screws	2
Surface protection	Bare
Ambient temperature, °C	-60...+80

View all specifications

Description

The bolted terminals and sleeves, like compression terminals and sleeves, are designed for termination of conductors. However they can be fixed without use of expensive equipment. A torque wrench is sufficient. Moreover, their unquestionable advantage is a capability to be used for termination and connection of both copper and aluminum conductors. All products have conductivity according to GOST 17441-84.

Life time:
30 years
Warranty:
6 years

Advantages

Applicable for copper and aluminum cores.
No special tool is required for installation.

Design Features

Each bolted connector is suitable for various sizes and designed for a range of cable cross sections.

The design of bolts has several bores, such as shear necks, whereby the head shear occurs flush with or below the surface of the tip.

Specifications

Nominal cross section, mm²	16...25
Bolt dimension metric (M..)	10
Number of screws	2
Surface protection	Bare
Ambient temperature, °C	-60...+80
Nominal voltage, kV	1
Material	Duralumin alloy
Oil stop/centre bar	No
With shear-off head	Yes
Moment of screw head failure during installation, Nm	14,7
Length, mm	50.0
Width, mm	16.0
Height, mm	16.0
Weight, kg	0,017
Insulation	No

Logistics parameters

	Group	Transport
Quantity	20	800
Units	pc; 1	pc; 1
Type of packaging	RECTANGULAR PACKAGE	CORPORATED
Packaging material	HIGH DENSITY POLYETHYLENE (HDPE)	FIVE-LAYER CORPORATED
Barcode	4606056363982	4606056363999
Gross weight, kg	0.468	18.7
Netto weight, kg	0.453475	18.139
Volume, m^3	0.0005	0.017856
Length, cm	10	36
Height, cm	5	16
Width, cm	10	31
Method of applying information	Mold	Mold