Connector with bolt GSP 35-50 35kW IEK
Product ID:
Main specifications
| Nominal cross section, mm² | 35...50 |
| Bolt dimension metric (M..) | 10 |
| Number of screws | 4 |
| Surface protection | Bare |
| Ambient temperature, °C | -60...+80 |
Description
The bolted terminals and sleeves, like compression terminals and sleeves, are designed for termination of conductors. However they can be fixed without use of expensive equipment. A torque wrench is sufficient. Moreover, their unquestionable advantage is a capability to be used for termination and connection of both copper and aluminum conductors. All products have conductivity according to GOST 17441-84.
Life time:
30 years
Warranty:
6 years
Advantages
- Applicable for copper and aluminum cores.
- The angular location of the bolts to secure the strands.
- No special tool is required for installation.
Design Features
Each bolted connector is suitable for various sizes and designed for a range of cable cross sections.
The design of bolts has several bores, such as shear necks, whereby the head shear occurs flush with or below the surface of the tip.
Specifications
| Nominal cross section, mm² | 35...50 |
| Bolt dimension metric (M..) | 10 |
| Number of screws | 4 |
| Surface protection | Bare |
| Ambient temperature, °C | -60...+80 |
| Nominal voltage, kV | 35 |
| Material | Duralumin alloy |
| Oil stop/centre bar | No |
| With shear-off head | Yes |
| Moment of screw head failure during installation, Nm | 24,5 |
| Length, mm | 77.0 |
| Width, mm | 19.0 |
| Height, mm | 19.0 |
| Insulation | No |
| Voltage row | Over 30 kV |
Logistics parameters
| Group | Transport | |
|---|---|---|
| Quantity | 10 | 350 |
| Units | pc; 1 | pc; 1 |
| Type of packaging | RECTANGULAR PACKAGE | CORPORATED |
| Packaging material | HIGH DENSITY POLYETHYLENE (HDPE) | FIVE-LAYER CORPORATED |
| Barcode | 4606056363890 | 4606056363906 |
| Gross weight, kg | 0.457 | 16 |
| Netto weight, kg | 0.4448143 | 15.569 |
| Volume, m^3 | 0.0005 | 0.018971 |
| Length, cm | 10 | 36.5 |
| Height, cm | 5 | 16.5 |
| Width, cm | 10 | 31.5 |
| Method of applying information | Mold | Mold |
