Lugs with bolt NA 70-120 10kW IEK
Product ID:
Main specifications
| Nominal cross section, mm² | 70...120 |
| Bolt dimension metric (M..) | 16х1,5 |
| Width | 28.0 |
| Height | 28.2 |
| Length | 100.0 |
Description
The bolted terminals and sleeves, like compression terminals and sleeves, are designed for termination of conductors. However they can be fixed without use of expensive equipment. A torque wrench is sufficient. Moreover, their unquestionable advantage is a capability to be used for termination and connection of both copper and aluminum conductors. All products have conductivity according to GOST 17441-84.
Life time:
30 years
Warranty:
6 years
Advantages
- Applicable for copper and aluminum cores.
- The angular location of the bolts to secure the strands.
- No special tool is required for installation.
Design Features
Each bolt tip is multi-sized and is designed for a range of cable cross-sections.
The design of bolts has several bores, such as shear necks, whereby the head shear occurs flush with or below the surface of the tip.
Specifications
| Nominal cross section, mm² | 70...120 |
| Bolt dimension metric (M..) | 16х1,5 |
| Width | 28.0 |
| Height | 28.2 |
| Length | 100.0 |
| Number of screws | 2 |
| Surface protection | Bare |
| Material | Duralumin alloy |
| Cross section form | Round stranded/sector stranded |
| Operating voltage, B | 10000 |
| Moment of screw head failure during installation of line cabs, Nm | 30 |
| Ambient temperature, °C | -60...+80 |
| Max. conductor cross section, mm² | 120 |
| Colour insulation | Other |
| Insulation | No |
Logistics parameters
| Group | Transport | |
|---|---|---|
| Quantity | 5 | 200 |
| Units | pc; 1 | pc; 1 |
| Type of packaging | RECTANGULAR PACKAGE | CORPORATED |
| Packaging material | HIGH DENSITY POLYETHYLENE (HDPE) | FIVE-LAYER CORPORATED |
| Barcode | 4606056364538 | 4606056364545 |
| Gross weight, kg | 0.553 | 22.1 |
| Netto weight, kg | 0.535925 | 21.437 |
| Volume, m^3 | 0.0005 | 0.017856 |
| Length, cm | 10 | 36 |
| Height, cm | 5 | 16 |
| Width, cm | 10 | 31 |
| Method of applying information | Mold | Mold |
