Lugs with bolt NA 35-50 10kW IEK
Product ID:
Main specifications
| Nominal cross section, mm² | 35...50 |
| Bolt dimension metric (M..) | 10х1 |
| Width | 22.0 |
| Height | 21.5 |
| Length | 82.0 |
Description
The bolted terminals and sleeves, like compression terminals and sleeves, are designed for termination of conductors. However they can be fixed without use of expensive equipment. A torque wrench is sufficient. Moreover, their unquestionable advantage is a capability to be used for termination and connection of both copper and aluminum conductors. All products have conductivity according to GOST 17441-84.
Life time:
30 years
Warranty:
6 years
Advantages
- Applicable for copper and aluminum cores.
- The angular location of the bolts to secure the strands.
- No special tool is required for installation.
Design Features
The design of bolts has several bores, such as shear necks, whereby the head shear occurs flush with or below the surface of the tip.
Each bolt tip is multi-sized and is designed for a range of cable cross-sections.
Specifications
| Nominal cross section, mm² | 35...50 |
| Bolt dimension metric (M..) | 10х1 |
| Width | 22.0 |
| Height | 21.5 |
| Length | 82.0 |
| Number of screws | 2 |
| Surface protection | Bare |
| Material | Duralumin alloy |
| Cross section form | Round stranded/sector stranded |
| Operating voltage, B | 10000 |
| Moment of screw head failure during installation of line cabs, Nm | 20 |
| Ambient temperature, °C | -60...+80 |
| Max. conductor cross section, mm² | 50 |
| Colour insulation | Other |
| Insulation | No |
Logistics parameters
| Group | Transport | |
|---|---|---|
| Quantity | 10 | 500 |
| Units | pc; 1 | pc; 1 |
| Type of packaging | RECTANGULAR PACKAGE | CORPORATED |
| Packaging material | HIGH DENSITY POLYETHYLENE (HDPE) | FIVE-LAYER CORPORATED |
| Barcode | 4606056364507 | 4606056364514 |
| Gross weight, kg | 0.476 | 23.8 |
| Netto weight, kg | 0.46172 | 23.086 |
| Volume, m^3 | 0.0005 | 0.017856 |
| Length, cm | 10 | 36 |
| Height, cm | 5 | 16 |
| Width, cm | 10 | 31 |
| Method of applying information | Mold | Mold |
