Heat-shrink sleeve TTU 6/3 yellow-green200 m/packing IEK
Product ID:
Main specifications
| Model | Thin-walled |
| Inner diameter before heat-shrink, mm | 6 |
| Inner diameter after heat-shrink, mm | 3 |
| Colour | Green-yellow |
| Length, m | 200 |
Description
Heat shrink tubing is used for electrical insulation, sealing and marking of wire connections, does not contain halogens, and has flame retardant properties. The principle of operation is to change its diameter by shrinking it in half.
Life time:
30 years
Warranty:
5 years
Advantages
- Does not support combustion
- Wide operating temperature range
- UV resistance
Design Features
Обладает особой эластичностью. Коэффициент усадки: 2:1.
Specifications
| Model | Thin-walled |
| Inner diameter before heat-shrink, mm | 6 |
| Inner diameter after heat-shrink, mm | 3 |
| Colour | Green-yellow |
| Length, m | 200 |
| Wall thickness before heat shrinkage, mm | 0,35±0,05 |
| Nominal cross section, mm² | 5,4 |
| Material | Other |
| Shrink rate | 2:1 |
| Wall thickness after shrinking, mm | 0,55±0,1 |
| Operation temperature, °C | -55...125 |
| Mounting temperature, °C | -10...50 |
| AC 50 Hz operating voltage, B | 660 |
| Tensile strength, MPa | ≥ 10,4 |
| Extend to Break, percent | ≥ 200 |
| Volumetric electrical resistance, Ohm per m | ≥ 1х10^14 |
| For dielectric strength up to, kV | ≥ 15 |
| Min shrinkage start temperature, °C | 70 |
| Min full shrinkage temperature, °C | 125 |
| Wire Diameter Range, mm | 3,1...5,4 |
| Type | Heat-shrink |
| With inner glue | No |
Documents
Passports
Logistics parameters
| Individual | Transport | |
|---|---|---|
| Quantity | 200 | 4 |
| Units | - | - |
| Type of packaging | COIL | CORPORATED |
| Packaging material | THREE-LAYER CORRUGATED | FIVE-LAYER CORPORATED |
| Barcode | 4606056145991 | 4606056146004 |
| Gross weight, kg | 2.575 | 10.3 |
| Netto weight, kg | 2.525 | 10.1 |
| Volume, m^3 | 0.02025 | 0.090988 |
| Length, cm | 45 | 43 |
| Height, cm | 10 | 46 |
| Width, cm | 45 | 46 |
| Method of applying information | Mold | Mold |
