Enter at least 2 characters

Heat-shrink sleeve TTU 14/7 yellow 1 m IEK

Description

Heat shrink tubing is used for electrical insulation, sealing and marking of wire connections, does not contain halogens, and has flame retardant properties. The principle of operation is to change its diameter by shrinking it in half.

  • Life time:

    30 years

  • Warranty:

    5 years

Advantages

  • Does not support combustion
  • Wide operating temperature range
  • UV resistance
Heat-shrink sleeve TTU 14/7 yellow 1 m IEK

Design Features

Обладает особой эластичностью.
Коэффициент усадки: 2:1.

Обладает особой эластичностью. Коэффициент усадки: 2:1.

Specifications

ModelThin-walled
Inner diameter before heat-shrink, mm14
Inner diameter after heat-shrink, mm7
ColourYellow
Length, m1
Wall thickness before heat shrinkage, mm0,35±0,1
With inner glueNo
Nominal cross section, mm²13
MaterialOther
Shrink rate2:1
Wall thickness after shrinking, mm0,7±0,1
Operation temperature, °C-55...125
Mounting temperature, °C-10...50
AC 50 Hz operating voltage, B660
Tensile strength, MPa≥ 10,4
Extend to Break, percent≥ 200
Volumetric electrical resistance, Ohm per m≥ 1х10^14
For dielectric strength up to, kV≥ 15
Min shrinkage start temperature, °C70
Min full shrinkage temperature, °C125
Wire Diameter Range, mm7,3...13,0
TypeHeat-shrink

Documents

Logistics parameters

GroupTransport
Quantity50600
Unitsmm
Type of packagingRECTANGULAR PACKAGECORPORATED
Packaging materialHIGH DENSITY POLYETHYLENE (HDPE)FIVE-LAYER CORPORATED
Barcode46060561857754606056185782
Gross weight, kg1.37516.5
Netto weight, kg1.332941716.005
Volume, m^30.010.042768
Length, cm100108
Height, cm1018
Width, cm1022
Method of applying informationMoldMold

Compatible Products

Analogs